YOMEDIA
ĐỀ THI SKILL CCNA1
Chia sẻ: LT P
| Ngày:
| Loại File: DOC
| Số trang:8
240
lượt xem
41
download
Download
Vui lòng tải xuống để xem tài liệu đầy đủ
Calculating the subnet addressing for the lab using the VLSM technique and note all information...
AMBIENT/
Chủ đề:
Nội dung Text: ĐỀ THI SKILL CCNA1
- ĐỀ THI SKILL CCNA1
CCNA1 SKILL BASED EXAMINATION
Duration: 80 minuten
Configuration requirements : (8 marks)
1. Calculating the subnet addressing for the lab using the VLSM technique and note all information
2. In each LAN, configure the second usable host address for PC1 and the last usable host address
3. Perform Basic Router Configurations all Routers.
4. Enable routing on R1, R2, R3 and R4 by using the static routing protocol.
Challenge questions: (2 marks)
- 1. How many bits need to be borrowed if the Classfull subneting technique is used ? __4 bit__
Subnet 1: 172.30.16.0/20 ---> 172.30.31.255/20
Subnet 2: 172.30.32.0/20 ---> 172.30.47.255/20
Subnet 3: 172.30.48.0/20 ---> 172.30.63.255/20
2. How many addresses for hosts will the network 124.12.4.0/22 provide?
A. 510
B. 512
C. 1022
C. 1024
D. 2046
E. 2048
- CCNA1 SKILL BASED EXAMINATION
Duration: 80 minuten
Configuration requirements: (8 marks)
1. Calculating the subnet addressing for the lab using the VLSM technique and note all information
2. In each LAN, configure the second usable host address for PC1 and the last usable host address
3. Perform Basic Router Configurations all Routers.
4. Enable routing on R1, R2, R3 and R4 by using the static routing protocol.
Challenge questions: (2 marks)
1. How many bits need to be borrowed if the Classfull subneting technique is used ? __4 bit__
Subnet 1: 172.25.16.0/20 ---> 172.25.31.255/20
- Subnet 2: 172.25.32.0/20 ---> 172.25.47.255/20
Subnet 3: 172.25.48.0/20 ---> 172.25.63.255/20
2. How many addresses for hosts will the network 124.12.4.0/21 provide?
A. 510
B. 512
C. 1022
D. 1024
E. 2046
F. 2048
- CCNA1 SKILL BASED EXAMINATION
Duration: 80 minutes
Configuration requirements: (8 marks)
1. Calculating the subnet addressing for the lab using the VLSM technique and note all information
2. In each LAN, configure the second usable host address for PC1 and the last usable host address
3. Perform Basic Router Configurations all Routers.
4. Enable routing on R1, R2, R3 and R4 by using the static routing protocol.
Challenge questions: (2 marks)
- 1. How many bits need to be borrowed if the Classfull subneting technique is used ? __4 bit__
Subnet 1: 172.16.16.0/20 ---> 172.16.31.255/20
Subnet 2: 172.16.32.0/20 ---> 172.16.47.255/20
Subnet 3: 172.16.48.0/20 ---> 172.16.63.255/20
2. How many addresses for hosts will the network 124.12.4.0/23 provide?
A. 510
B. 512
C. 1022
D. 1024
E. 2046
F. 2048
- CCNA1 SKILL BASED EXAMINATION
Duration: 75 minutes
I. CONFIGURATION REQUIREMENTS: (6 MARKS)
1. Calculating the subnet addressing for the lab using the VLSM technique and no
2. In each LAN, configure the second usable host address for PC1 and the last usa
3. Enable routing on R1, R2, and R3 by using the static routing protocol
- II. CHALLENGE QUESTIONS: (4 MARKS)
1. How many subnets are there in the above diagram ?.......4..........
2. How many bits need to be borrowed if the classfull subneting technique is used
3. What kind of router will be the router provide the clock rate for another? .........
4. Is it possible if the serial connection between R1 and R2 is replaced by the ethe
…………………………..
Thêm tài liệu vào bộ sưu tập có sẵn:
Báo xấu
LAVA
ERROR:connection to 10.20.1.100:9315 failed (errno=111, msg=Connection refused)
ERROR:connection to 10.20.1.100:9315 failed (errno=111, msg=Connection refused)
Đang xử lý...
Thêm vào BST
Báo xấu
