Presentation: report design and manufacture of plastic injection molding injection molds 3 panels

Chia sẻ: Tuan Tuan | Ngày: | Loại File: PPTX | Số trang:12

Thêm vào BST

Báo xấu

63
lượt xem 7
download

Download Vui lòng tải xuống để xem tài liệu đầy đủ

Presentations "report design and manufacture of plastic injection molding injection molds 3 plate" is made with the following contents: Structure, operation principles, applications, features recognizable. To master the content knowledge scratch paper invite you to consult the documentation.

Chủ đề:

Bình luận(0) Đăng nhập để gửi bình luận!

Lưu

Nội dung Text: Presentation: report design and manufacture of plastic injection molding injection molds 3 panels

REPORT DESIGN AND MANUFACTURING PLASTIC INJECTION MOLD 3 plate injection mold
constitute • 1, 3: Fasteners Hexagon • 2: Springs Urethane • 4: Nozzle extension • colloidal silver lining • 5: Colloidal silver lining • 6: Foodstuffs
constitute
constitute 7: Silver Lining spinning 8: Closing the guide 9: Film guide liner 10: Film guide 11: Bat shaft 12: Space
Tấm khuôn yêu cầu 3 lần mở cửa.
LẦN 1
the second is to open casting parts.
the Third is to open casting parts.
III. APPLICATION • The largesized details.
• The details are complex shape, requiring injection port.
IV. IDENTIFICATION FEATURES • IDENTIFICATION FEATURES Forced self vTrong quatrinh Cut the tail glue. vCo great details trungnhu: Parting lock. vChot points and channels are not located on the parting.