Returning an Output Parameter Using a DataReader

Chia sẻ: Bui Tuan | Ngày: | Loại File: PDF | Số trang:4

Thêm vào BST

Báo xấu

95
lượt xem 10
download

Download Vui lòng tải xuống để xem tài liệu đầy đủ

[ Team LiB ] Recipe 2.9 Returning an Output Parameter Using a DataReader Problem You want to access an output parameter returned by a stored procedure that you have used to create a DataReader. Solution Add a parameter

Chủ đề:

Bình luận(0) Đăng nhập để gửi bình luận!

Lưu

Nội dung Text: Returning an Output Parameter Using a DataReader

[ Team LiB ] Recipe 2.9 Returning an Output Parameter Using a DataReader Problem You want to access an output parameter returned by a stored procedure that you have used to create a DataReader. Solution Add a parameter to a Command's ParameterCollection and specify the ParameterDirection as either Output or InputOutput. The sample code uses a single stored procedure: SP0209_OutputValueWithDataReader Returns a result set containing all records from the Orders table in Northwind. The stored procedure takes one input and one output parameter and sets the value of the output parameter to the value of the input parameter. The sample code creates a DataReader from a stored procedure command as shown in Example 2-9. The stored procedure returns a single output parameter, and then the stored procedure sets this value to the value of the input parameter specified by the user. The code displays the value of the output parameter at four different stages of working with the result set in the DataReader: • Before the DataReader is created • Immediately after the DataReader is created • After all rows in the DataReader have been read • After the DataReader is closed Example 2-9. Stored procedure: SP0209_OutputValueWithDataReader CREATE PROCEDURE SP0209_OutputValueWithDataReader @ValueIn int, @ValueOut int output AS set nocount on set @ValueOut = @ValueIn select * from Orders
RETURN The C# code is shown in Example 2-10. Example 2-10. File: SpOutputValueDataReaderForm.cs // Namespaces, variables, and constants using System; using System.Configuration; using System.Text; using System.Data; using System.Data.SqlClient; // . . . StringBuilder result = new StringBuilder( ); // Create the connection. SqlConnection conn = new SqlConnection( ConfigurationSettings.AppSettings["Sql_ConnectString"]); // Create the command. SqlCommand cmd = new SqlCommand("SP0209_OutputValueWithDataReader", conn); cmd.CommandType = CommandType.StoredProcedure; // Define the input parameter for the command. cmd.Parameters.Add("@ValueIn", SqlDbType.Int); // Set the input parameter value. cmd.Parameters[0].Value = Convert.ToInt32(outputValueTextBox.Text); // Define the output parameter for the command. SqlParameter outParam = cmd.Parameters.Add("@ValueOut", SqlDbType.Int); outParam.Direction = ParameterDirection.Output; result.Append("Before execution, output value = " + outParam.Value + Environment.NewLine); // Open the connection and create the DataReader. conn.Open( ); SqlDataReader dr = cmd.ExecuteReader( ); result.Append("After execution, output value = " + outParam.Value +
Environment.NewLine); // Iterate over the records for the DataReader. int rowCount = 0; while (dr.Read( )) { rowCount++; // . . . Code to process result set in DataReader } result.Append("After reading all " + rowCount + " rows, output value = " + outParam.Value + Environment.NewLine); // Close the DataReader. dr.Close( ); result.Append("After DataReader.Close( ), output value = " + outParam.Value + Environment.NewLine); // Close the connection. conn.Close( ); resultTextBox.Text = result.ToString( ); Discussion Output parameters allow a stored procedure to pass a data value or cursor variable back to the caller. To use an output parameter with a DataReader, add the output parameter to the ParameterCollection for the Command object used to create the DataReader. Specify the ParameterDirection property of the Parameter as Output or InputOutput. Table 2-11 describes all values in the ParameterDirection enumeration. Once all parameters are defined, build the DataReader using the ExecuteReader( ) method of the Command object. Table 2-11. ParameterDirection enumeration Value Description The parameter is an input parameter allowing the caller to pass a data Input value to the stored procedure. The parameter is both an input and output parameter, allowing the caller InputOutput to pass a data value to the stored procedure and the stored procedure to pass a data value back to the caller.
The parameter is an output parameter allowing the stored procedure to Output pass a data value back to the caller. ReturnValue The parameter represents the value returned from the stored procedure. Output parameters from the stored procedure used to build a DataReader are not available until the DataReader is closed by calling the Close( ) method or until Dispose( ) is called on the DataReader. You do not have to read any of records in the DataReader to obtain an output value. [ Team LiB ]