Basic techniques used

The techniques of supervised ones are applied to the data domain in order to have a comparison between the evaluated system of POSSUM and the advantage of Neural network. The comparisons are based on the rate of mortality and morbidity of patients. The outcome set of unsupervised learning techniques is compared to the results of supervised ones.

8p tamynhan8 04-11-2020 19 1   Download

Smart car deals with the smart collision avoidance between the vehicles using visible light communication. The basic concept behind this technique is that the data can be transferred through LED light by varying light intensities faster than the human eyes can perceive.

9p lucastanguyen 01-06-2020 24 2   Download

In the first lesson of inorganic chemistry lab, preparing and testing solutions are two basic tasks needed to perform well. Dissolving a solid solute in the solvent or diluting the stock solution (a dilution series by using two techniques that are making parallel dilutions and serial dilutions) is to prepare solution with desired concentration of solute or desired volume.

11p suplo28475858 24-05-2020 34 3   Download

"Unit 1: Designing through flat pattern technique" presentation of content: Introduction, pattern making tools, terminology, materials used, basic techniques used in flat pattern designing. Invite you to consult.

84p thuplato 17-05-2016 52 9   Download

Lecture "Charter 3: Structured program development in C" provides students with the knowledge: Basic problem-solving techniques, to develop algorithms through the process of top-down, stepwise refinement, to use the if selection statement and if...else selection statement to select actions,... Inviting you refer.

79p doinhugiobay_13 24-01-2016 48 3   Download

The following will be discussed in this chapter: Describe the functions, characteristics, and operation of the RIPv1 protocol; configure a device for using RIPv1; verify proper RIPv1 operation; describe how RIPv1 performs automatic summarization; configure, verify, and troubleshoot default routes propagated in a routed network implementing RIPv1; Use recommended techniques to solve problems related to RIPv1.

62p youcanletgo_01 04-01-2016 61 6   Download

Learning objectives of this chapter include: Identify the devices and protocols used in a small network; explain how a small network serves as the basis of larger networks; explain the need for basic security measures on network devices; identify security vulnerabilities and general mitigation techniques;...

55p youcanletgo_01 29-12-2015 65 3   Download

To help you have more specialized technique references serve the needs of academic and research, invite you to consult the document content "Chapter 2: Basic conceppts of electronics". Hope this is useful references for you.

0p thangdambme 23-10-2015 30 2   Download

By Neil Russell-Jones and Tony Fletcher Drawings by Phil Hailstone “A very useful introduction for anyone who wants to understand marketing terminology”. Alan Dunstan, Director - Sales and Marketing, Lloyds Abbey Life “An excellent introduction to the tools and techniques of marketing”. Graham Howe, Group Finance Director, Orange

128p dove_12 12-06-2013 69 7   Download

A system has been programmed in JOVIAL to serve as a vehicle for testing hypotheses about language change through time. A basic requirement of the system is that models must be formulated within the framework of Sapir's concept of drift and Bloomfield's definition of a speech community.

16p nghetay_1 06-04-2013 47 1   Download

Configuration requirements: (65 marks) 1. Calculating the subnet addressing for the lab using the VLSM technique and note all information needed on the topology.(10) 2. Perform Basic Router Configurations all Routers.(5) 3. In each LAN, configure the second usable host address for PC1 and the last usable host address for PC2.(5) 4. Enable routing on HQ, BRANCH1, and BRANCH2 by using the dynamic routing protocol as EIGRP.(Using wildcard mask, AS number = 1).(30) 5. Configure the static route for the Internet connection (10) 6.

2p anhchangxuixeo1002 14-03-2013 76 5   Download

We now begin our look at building protocols using the basic tools that we have discussed. The discussion in this lecture will focus on issues of key establishment and the associated notion of authentication These protocols are not real, but instead are meant to serve just as a high-level survey Later lectures will go into specific protocols and will uncover practical challenges faced when implementing these protocols

20p muathu_102 28-01-2013 63 9   Download

Given a collection of records (training set ) Each record contains a set of attributes, one of the attributes is the class. Find a model for class attribute as a function of the values of other attributes. Goal: previously unseen records should be assigned a class as accurately as possible. A test set is used to determine the accuracy of the model. Usually, the given data set is divided into training and test sets, with training set used to build the model and test set used to validate it.

101p trinh02 18-01-2013 101 12   Download

In this paper, we are dealing with a L-band power combiner method using the Wilkinson bridge. This is a modern power combination technique in the microwave technology. The design and simulink of the basic power moduls and Wilkinson bridge were performed using the ADS soflware. We have researched, designed and fabricated the power combination from the basic 200W moduls. The experimental results showed that power combination method using the Wilkinson bridge may be applicable in the L-band transmission....

5p tuanlocmuido 19-12-2012 74 3   Download

Photoshop’s interface can be a confusing place to first time users. This lesson will show you what’s what, and how to navigate through the behemoth which is Photoshop. Before starting, please take note that I will be demonstrating how to use Adobe Photoshop with Version 9 (Adobe Photoshop CS2). If you are using another version of Photoshop, you should have very little trouble following along, as very little as changed in regards to interface and basic functionality in the past few versions.

5p bongbong_hong 04-12-2012 60 3   Download

Understand the linguistic systems Grasp basic principles of language learning & teaching Have fluent competence in speaking, writing, listening & reading Understand the close relationship b/w language & culture.apply well-informed approach to teaching use wide variety of techniques design & execute lesson plans use effective, clear presentation skills give optimal feedback to Ss …

0p namson94 20-07-2012 113 16   Download

Calculating the subnet addressing for the lab using the VLSM technique and note all information needed on the topology.(10) 2. Perform Basic Router Configurations all Routers.(5) 3. In each LAN, configure the second usable host address for PC1 and the last usable host address for PC2.(5) 4. Enable routing on HQ, BRANCH1, and BRANCH2 by using the dynamic routing protocol as EIGRP.(Using wildcard mask, AS number = 1).(30)

2p phutran76 16-07-2012 94 15   Download

Calculating the subnet addressing for the lab using the VLSM technique and note all information needed on the topology. 2. Perform Basic Router Configurations all Routers. 3. In each LAN, configure the second usable host address for PC1 and the last usable host address for PC2. 4. Enable routing on HQ, BRANCH1, and BRANCH2 by using the dynamic routing protocol as EIGRP.(Using wildcard mask, AS number = 1).

2p phutran76 16-07-2012 143 58   Download

Calculating the subnet addressing for the lab using the VLSM technique and note all information needed on the topology. 2. Perform Basic Router Configurations all Routers. 3. In each LAN, configure the second usable host address for PC1 and the last usable host address for PC2. 4. Enable routing on R1,R2, R3, R4, R5 and R6 by using the dynamic routing protocol as EIGRP.

2p phutran76 16-07-2012 79 14   Download

Calculating the subnet addressing for the lab using the VLSM technique and note all information needed on the topology.(60 marks) In each LAN, configure the second usable host address for PC1 and the last usable host address for PC2.(5 marks) Perform Basic Router Configurations all Routers.(10 marks) Enable routing on R1, R2, R3 and R4 by using the static routing protocol.(5 marks)

2p phutran76 16-07-2012 71 6   Download