Chemical properties

The research is motivated by the growing interest in using natural products for biopolymer engineering, particularly in developing bioactive and biocompatible materials. Genipin, a natural blue colorant precursor, has garnered attention due to its unique chemical structure and crosslinking properties with natural polymers.

11p viinuzuka 28-02-2025 5 1   Download

The article investigates the potential of using sea sand and seawater from Ha Tien City, Kien Giang Province, in geopolymer concrete production. Geopolymer concrete is an environmentally friendly material that can help reduce greenhouse gas emissions while utilizing locally available resources.

5p vibenya 31-12-2024 11 2   Download

Is a branch of polymer science dealing with analysis and characterisation of polymers. üThe complication of macromolecular chains, the dispersion in molecular weight, tacticity, crystallinity, orientation, composition of polymers etc. and complex morphological systems ⇒ analysis of polymer ≠ the small organic materials ⇒ Focus on viscoelastic properties, dynamic mechanical testing.

114p buitiendung87 06-01-2011 347 154   Download

Bảng thường dùng: Để bật/tắt các bảng: Vào View chọn các bảng tương ứng cần mở hoặc đóng Bảng thông tin tọa độ (info window) Bảng hệ thống tuần hoàn các nguyên tố hoá học (periodic table) Bảng tính chất hoá – lý của các chất (chemical properties): Bảng phân tích chi tiết (analysis) Bảng đồ các ký tự (character map)

57p thanhdong101991 20-08-2012 446 53   Download

This paper was performed to evaluate the photothermal effect of pure gold nanoparticles (Au NPs) prepared by electrochemical method at different voltages, under laser irradiation in the safe wavelength range. The formation, morphological, and structural properties of Au NPs were analyzed by UV-Vis absorption spectroscopy, transmission electron microscopy (TEM), and X-ray diffraction (XRD).

11p viprimi 16-12-2024 2 1   Download

The purpose of this thesis is to study and synthesize BiMO materials (M = V,Ti,Sn) by microwaveassisted chemical method, hydrothermal method, sol-gel method and evaluate their physical properties. The synthesized materials (Bi2Sn2O7 and Bi2Ti2O7) were investigated the photocatalytic activity in the decomposition of RhotaminB (RhB) under visible light.

28p thebadguys 08-06-2021 28 3   Download

In this thesis, we research and fabricate AgNDs, AgNFs, AuNFs structures on silicon by chemical deposition and electrochemical deposition method for the main purpose of using as SERS substrate. To this target, we have studied the morphology, structure and some properties of the nanostructures produced.

26p extraenglish 24-05-2021 31 4   Download

Research objectives of the thesis: The thesis was conducted to research and develop a new type of electrode: glass charcoal electrodes modified by flower platinum nano (PtNFs/GC) and to evaluate the properties of fabricated electrodes: electrode structure, morphology, physical and chemical properties.

28p extraenglish 24-05-2021 32 4   Download

Research aims and objectives: Determining the effect of the single additive being organic and inorganic substances such as poly alcohol, poly amines, sodium salt of various modules and the combination of additives on the properties of the zinc coating created in the solution. alkaline plating solution without cyanide, compare the chemical and physical properties of the coating obtained from the non cyanide alkaline plating bath and other plating baths.

26p extraenglish 24-05-2021 23 4   Download

Present study aims to investigate the seasonal variations of physico-chemical properties and associated weed flora at Dalpatsagar reservoir.

9p chauchaungayxua11 23-03-2021 12 3   Download

Determining the effect ofthe single additive being organic and inorganic substances such as poly alcohol, poly amines, sodium salt of various modules and the combination of additives on the properties of the zinc coating created in the solution. alkaline plating solution without cyanide, compare the chemical and physical properties of the coating obtained from the non cyanide alkaline plating bath and other plating baths.

26p capheviahe29 17-03-2021 22 5   Download

Successful fabrication of polymer nanocomposite on the basis of PA6, PC thermoplastics, and CNT reinforcement to effectively apply the material system to the production of body protection equipment for the army forces.

28p capheviahe27 23-02-2021 22 3   Download

In this thesis, we research and fabricate AgNDs, AgNFs, AuNFs structures on silicon by chemical deposition and electrochemical deposition method for the main purpose of using as SERS substrate. To this target, we have studied the morphology, structure and some properties of the nanostructures produced.

26p capheviahe27 23-02-2021 36 4   Download

Determining the effect of the single additive being organic and inorganic substances such as poly alcohol, poly amines, sodium salt of various modules and the combination of additives on the properties of the zinc coating created in the solution. alkaline plating solution without cyanide, compare the chemical and physical properties of the coating obtained from the non cyanide alkaline plating bath and other plating baths. Since then, an additive system can be used in alkaline zinc-plated tanks without cyanide.

26p capheviahe27 23-02-2021 34 5   Download

Objectives of this dissertation: Develop the optimal preparation procedure of modified biochar and activated carbon derived from an agricultural byproduct, such as corncob wastes; Investigate the physical and chemical properties of modified biochar and activated carbon; apply modified biochar and activated carbon in removal of ammonium from synthesised and real water under batch and column experiments.

28p capheviahe27 23-02-2021 28 3   Download

Study the structural, morphological and physicochemical properties of synthetic materials by modern physical and chemical methods such as XRD, FTIR, SEM, TEM, XPS, EDX, BET, TG-DTA, UV -Vis; evaluation of photochemical catalyst using visible light in the decomposition of dyes RR-195, RY-145 on synthetic materials.

27p capheviahe26 25-01-2021 49 3   Download

The catalyst 7.5% NiO/TiO2 and seven samples of NiO/γ-Al2O3 with NiO content from 7.5% to 60% have been obtained and studied. Physico-chemical characteristics of the catalysts were determined by methods of Adsorption (BET), X-ray Diffraction (XRD), TemperatureProgrammed Reduction (TPR) and Hydrogen Pulse Titration. The catalytic properties of the obtained samples were investigated in the reaction of CO methanation at temperatures 180 – 220◦C and mole ratios hydrogen/carbon monoxide 25-100.

16p 12120609 01-06-2020 10 1   Download

It was demonstrated that Poly(p-Xylylene) (PPX) could be prepared from α,α’-Bis(Alkoxy or Aryloxy) –p-Xylenes via chemical vapor decomposition (CVD)- method. This is one-step process and there are side products by the CVD-process. This effect depends both on the CVD- condition and the properties of the starting monomer. The structure and thermal behavior of the material were characterized by FTIR, UVvis spectroscopy, elemental analysis, wide-angle X-ray diffraction, DTA and DSC.

14p 12120609 01-06-2020 23 2   Download

Polyaniline (PANI) was synthesized chemically in an acidic medium in the presence of ammonium persulfate (APS) as an oxidizing agent. PANI/montmorillonite nano-composites were prepared in the presence of various amounts of modified clay (from 1 to 5 wt.%) by solution casting method.

8p tocectocec 25-05-2020 16 3   Download

In this work, novel cellulosic fibers are extracted from Washingtonia Filifera (WF) plant using an environment friendly technique. Morphological, physico-chemical, thermal and mechanical properties are reported in this paper.

14p tohitohi 19-05-2020 11 1   Download