Cutting depth

This article will be to study and choose the most reasonable cutting depth to reduce power consumption during the machining of the end face and meet the requirements for roughness when machining flat milling products on Makino KJ milling machines.

7p visarada 28-04-2025 2 1   Download

This paper presents optimization results of the Al6061 surface roughness in turning ultra-precision based on the central composite design method (CCD) and the grey wolf optimization algorithm (GWO). The experimental matrix is built with three independent variables including spindle speed, feed rate and depth of cut. With the experimental data, the roughness regression model is established.

7p viaburame 14-03-2025 5 1   Download

Abraham’s cones : Khuôn hình chóp cụt để đo độ sụt bê tông Accelerator, Earlystrength admixture : Phụ gia tăng nhanh hóa cứng bê tông Anchorage length : Chiều dài đoạn neo giữ của cốt thép Arrangement of longitudinales renforcement cut-out: Bố trí các điểm cắt đứt cốt thép dọc của dầm Arrangement of reinforcement : Bố trí cốt thép Bag Beam of constant depth Bedding Bonded tendon Bursting concrete stress : Bao tải (để dưỡng hộ bê tông) : Dầm có chiều cao không đổi : Móng cống : Cốt thép dự ứng lực có dính bám với bê...

21p tanleanhhung 16-08-2012 530 283   Download

Studying, analyzing and evaluating the basic factors affecting the wear resistance of the shear cutting drum, such as coal strength, the geometry of the cutting teeth, materials of cutting teeth, the cutting angle. Cutting depth, cutting feed and cutting speed are the basis for selecting the appropriate factors in fabrication, using the cutting teeth of the shearer.

27p closefriend09 16-11-2021 25 2   Download

This experimental study investigated the effects of milling conditions on the finished surface roughness. With four controllable factors-three levels (cutting velocity, feedrate, radial depth of cut, and cutter helix angle), the nineteen experiments were performed with performance measurements of surface roughness.

10p lucastanguyen 01-06-2020 40 2   Download