
Design parameters
-
In the design and calculation of stormwater drainage systems, the design rainfall intensity plays a crucial role and is widely used in runoff calculations. Due to the influence of local climatic factors, the selection of probability distributions for rainfall frequency analysis and the methods used to determine parameters for empirical equations result in a variety of equations compared to traditional Rainfall Intensity-Duration-Frequency curves.
12p
visarada
28-04-2025
1
1
Download
-
This study investigates how different test parameters—such as flow rate, soil type, moisture content, and confining conditions—affect the erosion behavior of soils. Through controlled hydraulic erosion tests, the research identifies key factors influencing critical shear stress and erosion rates. The findings aim to enhance understanding of soil stability in engineering applications and inform the design of erosion-resistant structures.
3p
vimaito
11-04-2025
1
0
Download
-
This paper presents the results of 32 experiments (L32) that aimed to examine the impact of grinding parameters on surface roughness and cutting force during the surface grinding of 90CrSi steel using the Hai Duong grinding wheel.
11p
viengfa
28-10-2024
3
2
Download
-
This study investigates the effects of thermo-mechanical processing parameters, specifically cold rolling and annealing, on the ultimate tensile strength (UTS) of AA2024 alloy, employing a Box-Behnken experimental design. The deformation during cold rolling, the annealing temperature, and the time annealing were varied to evaluate their individual and combined effects on the UTS.
14p
viyuhi
26-03-2025
4
1
Download
-
Mathematical model of reaction systems contains experimental parameters such as reaction enthalpies, which may be inaccurate and, therefore, severely affect the computation as well as the implementation of feedback control laws. This paper aims to design an adaptive PI-like controller to regulate a chemical reaction system by means of the Lyapunov theory.
11p
viinuzuka
28-02-2025
3
1
Download
-
"Dynamo: Visual Programming for Design" will demonstrate how to use Dynamo Visual Programming forautodesk® revit® software and autodesk vasari. The lab will provide users with resources and step by step examples for automating geometry creation, adjusting family parameters using external data, and sharing information with different design platforms.
56p
nhatvykts
01-10-2014
369
61
Download
-
S/N ratio should be above a certain threshold (a function of modulation scheme). Signal power should be above the sensitivity threshold. Predict received signal strength when the transmitter and receiver have a clear line-of-sight path between them.
57p
nhq_khtn
12-03-2011
112
36
Download
-
Solubility parameters of carbon quantum dots (CQDs) are important physical properties to deploy CQDs in various applications such as organic light emitting diodes (OLEDs), light-converting materials in LEDs, and photoluminescent sensors for metal ion detection. Because of the low toxicity and tunable emission most CQDs have been designed to be water-soluble and biocompatible; oilsoluble CQDs that are essential for OLEDs are not yet explored.
8p
viprimi
16-12-2024
5
1
Download
-
In this chapter the following content will be discussed: The root locus concept, the root locus procedure, parameter design by the root locus method, sensitivity and the root locus, pid controllers, negative gain root locus, the root locus using control design software.
61p
youcanletgo_04
17-01-2016
78
3
Download
-
Lecture Control system design: Feedback control system characteristics presents the following content: Error signal analysis, sensitivity of control systems to parameter variations, disturbance signals in a feedback control system, control of the transient response, steady – state error, the cost of feedback, control system characteristics using control design software.
32p
youcanletgo_04
17-01-2016
60
2
Download
-
This thesis presents a pro–active research work motivated by the prospect of the imminent implementation of the regulatory requirement for pedestrian protection, Global Technical Regulation–9 (GTR–9) (United Nations Economic Commission for Europe 1998) in the near future. To meet the performance criteria for pedestrian protection head impact, it is vital to incorporate the required design parameters into the hood design process at an early stage. These main design parameters are architectural and changing them late in the vehicle design process is very expensive and difficult to implement.
244p
runthenight05
01-03-2023
15
3
Download
-
The current research is undertaken by performing Computational Fluid Dynamics (CFD) simulations for a 2D aerofoil fitted with a shock control bump at a transonic flow condition. Reynolds-Averaged Navier-Stokes equation coupled with turbulence models is adopted to solve the flowfield. The bump has a conventional geometric feature which consists of a ramp, a crest and a tail, and it has eight variants for which the designed parameters are reasonably specified according to the compressible aerodynamics theory.
84p
runthenight04
02-02-2023
12
3
Download
-
The research has designed a novel active truck seat suspension system for a further study of active vibration control. A 5-degree-of-freedom driver and seating suspension system model for active vibration control has been developed. A novel fast system parameter identification method from vibration measurement data has been proposed for the seat-occupant system based on the multi-objective Genetic Algorithm optimization (GA).
206p
runthenight04
02-02-2023
15
5
Download
-
The main theme of the dissertation: The dissertation targets the basic research on the physical models and new structures; calculating and simulating the bistable devices using 1D, 2D PhC structures. The effects of the PhC configuration and structural parameters on the optical characteristics and working performance of bistable devices will be investigated.
28p
extraenglish
24-05-2021
27
4
Download
-
The dissertation targets the basic research on the physical models and new structures; calculating and simulating the bistable devices using 1D, 2D PhC structures. The effects of the PhC configuration and structural parameters on the optical characteristics and working performance of bistable devices will be investigated.
28p
capheviahe27
23-02-2021
16
3
Download
-
The paper presents a brief description of an automated system, designed to control coal quality in accordance with the specified parameters of the waste rock content owing to obtaining, collecting, processing and storing information from primary instruments, using a radioisotope measuring method.
5p
lucastanguyen
01-06-2020
32
2
Download
-
Source and sink activity measured after anthesis in six poplar rice cultivars. The experiment was laid in randomized block design with six cultivars MTU-1001, MTU1010, MTU-7029, BPT-2231, BPT-3291 and BPT-5204 replicated four times. After anthesis, top three leaves separately, top three internodes collectively, panicle axis and grain of main culm were sampled at seven day interval and analysed for biochemical parameters that serve remobilization of nutrients. During the initial and later halves of the sampling, there was a shift in higher amylase activity from third to flag leaves.
8p
gaocaolon5
14-06-2020
13
2
Download
-
A Field experiment was conducted at college form, agricultural college bapatla in clay loam soils during Rabi 2013-14 to study the effects of Ethrel, kinetin and boron foliar application on physiology of growth, development and yield of chickpea (Var. KAK 2) in randomized block design with eight treatments viz., 250ppm Ethrel at 25 DAS (T1), 10 ppm kinetin at 35 DAS (T2), 0.25% boron at 45 DAS (T3), 250 ppm Ethrel at 25DAS + 10 ppm Kinetin at 35DAS (T4), 10 ppm Kinetin at 35DAS + 0.25% boron at 45 DAS (T5), 250 ppm Ethrel at 25DAS + 0.
8p
gaocaolon5
14-06-2020
27
2
Download
-
This presents the advantage of decoupling the management of the minor actinides from the conventional fuel and not impacting the core reactivity coefficients. In both cases, the design and analyses of potential transmutation systems have been carried out in the frame of Gen IV fast reactor using a “perturbation” approach in which nominal power reactor parameters are modified to accommodate the loading of minor actinides.
8p
christabelhuynh
31-05-2020
28
1
Download
-
We propose here to implement an optimization methodology of the blankets design with regards to various parameters such as the local spectrum or the mass to be loaded, with the objective of minimizing the final neutron source of the spent assembly while maximizing the transmutation performances of the blankets.
9p
christabelhuynh
30-05-2020
15
1
Download