Driving a DC Motor

The purpose of the field-oriented control (FOC) is therefore to create a tool that allows the decoupling control of the flux and torque-producing current components from the three-phase AC currents flowing in the coil. The FOC drive system is a system based on the principle of decoupling the above power components thanks to the stator current feedback control (the innermost circuit of the drive system). The FOC-type control method belongs to the class of vector control methods for electrical machines.

22p dianmotminh02 03-05-2024 5 2   Download

Getting Started, LED Effects, Simple Sounders and Sensors, Driving a DC Motor, Liquid Crystal Displays, Steppers and Robots, Temperature Sensors, Ultrasonic Rangefinders,... As the main contents in the textbook "Beginning Arduino". Invite you to consult.

417p ptruong1993 16-11-2015 142 46   Download

A drive sizing makes sure that the drive has enough torque to satisfy the load requirements to overcome friction losses, provide sufficient load thrust, and provide enough acceleration torque for the type of acceleration required. Once the drive-sizing requirement is satisfied, the servo drive stability must be addressed. Stabilizing the servo drive is a matter of adjusting the servo compensation. All industrial servo drives require some form of compensation often referred to as proportional, integral, and differential (PID).

27p thanhspktcdt10 23-03-2013 68 5   Download

DC drives are widely used in applications that require regeneration, precise speed control, dynamic performance, and constant torque over wide speed ranges. The Mentor II delivers the universal DC drive solution. Simple stand-alone applications are easily configured to control motor speed, voltage or current using standard internal settings. Set-up is convenient using the drive keypad, CTKP remote keypad, or MentorSoft, a Windows based drive configuration tool. The Mentor II has extensive diagnostic and communication abilities that enhance system reliability.

8p vankent 08-07-2010 182 29   Download

The L298 is an integrated monolithic circuit in a 15lead Multiwatt and PowerSO20 packages. It is a high voltage, high current dual full-bridge driver designed to accept standardTTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Two enableinputs are provided to enableor disable the deviceindependentlyof the input signals. The emitters of the lower transistors of each bridge are connected together and the corresponding external terminal can be used for the conBLOCK DIAGRAM...

13p haidang1 21-12-2009 103 11   Download