Experimental system

This paper is structured as follows. The following section presents related work. Section 3 summarizes the characteristics of the two datasets utilized in the model and the system’s overall architecture for image-based disease diagnosis. Section 4 provides our experimental results that compare the performance metrics with other studies.

6p viengfa 28-10-2024 3 2   Download

This study presents the development of an automatic electrical fault detection system for inductors, aimed at enhancing cost-effectiveness and reducing risks for businesses. First, the paper provides the structure, standards, and technical parameters of different types of inductors.

6p viaburame 14-03-2025 9 1   Download

Mathematical model of reaction systems contains experimental parameters such as reaction enthalpies, which may be inaccurate and, therefore, severely affect the computation as well as the implementation of feedback control laws. This paper aims to design an adaptive PI-like controller to regulate a chemical reaction system by means of the Lyapunov theory.

11p viinuzuka 28-02-2025 3 1   Download

This study was carried out to provide scientific proof to justify the intended medicinal use of PDDT tablets with two main objectives: 1) Investigate the effects of PDDT on mice’ intestinal motility; 2) Evaluate the effects of PDDT on rabbits’ isolated intestinal segments.

7p viyamanaka 06-02-2025 5 2   Download

Nowadays, there are many factors causing the decrease of male reproductive function such as diet, routine, chemical, ... But some of them have not been paid appropriate attention to, especially the use of paracetamol, which has a significant negative effect on the reproductive process. In this study, we will summarize the results of several studies on the harmful effects of prolonged high-dose use of paracetamol on sperm number, quality, portability and testicular morphology in experimental animals and humans.

15p vinara 11-01-2025 6 1   Download

In the present study, cooling of PV module using a paraffin-based phase change material (PCM) in hot climate of Vietnam is investigated. Thermal modelling is first validated against experimental data reported in literature and then transient thermal simulations are carried out for a duration of 24 hours to assess the effect of PCM itself and PCM with internal fins.

6p vibenya 31-12-2024 6 2   Download

In this paper, we present a new improvement of the third-order Newton-Krylov method with a quaternary convergence rate and prove the convergence of the iterative formula. In addition, the paper also presents an experimental result to demonstrate the convergence speed of the method.

9p viprimi 16-12-2024 4 1   Download

Magnetic bearing systems have received much attention in the research community for the past decades. Its inherent nonlinearity and open-loop instability present challenges for controller design. This thesis investigates and designs model predictive control (MPC) systems for an experimental Active Magnetic Bearing (AMB) laboratory system. A host-target development environment of real-time control system with hardware in the loop (HIL) is used for implementation of the predictive control systems. In this thesis, both continuous and discrete time model predictive controllers are studied.

172p runthenight05 01-03-2023 14 3   Download

The aim of this Master of Engineering (MEng) - Aerospace thesis is to study the structural response and failure of aerospace grade composites during exposure to fire. Key aspects of the research are to analyse the thermal and mechanical responses of laminates and sandwich composites in high temperature and fire environments, which result in softening and structural failure. The research is concentrated on carbon/epoxy laminates and sandwich composites, which are the most common composite materials used in aerospace structures.

209p runthenight05 01-03-2023 14 3   Download

The thesis is structured as follows: Chapter 1 Introduction; Chapter 2 Literature Review; Chapter 3 Experimental Design, Development and Application of an Accelerated Drill Test; Chapter 4 Discussion: The Developed Accelerated Drill Test; Chapter 5 Conclusions and Recommendations for Further Work; Appendix A – VMC Setup and Programming for Drill Testing; Appendix B - Designing an Automated Drill Test and DAQ System for Spindle Current Collection.

172p runthenight07 01-03-2023 12 3   Download

The primary goal of this research is accomplishing the BUUAS that can realize functions in the mission profile. In order to achieve this, the project starts with developing elemental aspects of the BUUAS. The configuration and propulsion system are two basic elements that the BUUAS must have to realize successfully operation. Besides, the necessary transition process between water and air must be investigated and carried by a conceived system.

187p runthenight04 02-02-2023 11 2   Download

The primary aim of this research was to further develop the sensing and estimation module of the CHMS framework with an improved multimodal inference model of MWL as needed for the application in aerospace CPHS. Here the focus of this research was on the implementation of a multimodal inference model of MWL that would be developed and experimentally tested. This was done with the purpose of studying the viability of real‐time system adaptation in aerospace systems.

283p runthenight04 02-02-2023 20 3   Download

The following boundaries are considered in pursuing the proposed research study: This study is conducted on an experimental basis; Domestic hot water supply using evacuated tube solar thermal collectors has been selected as the applied context for this study; Paraffin has been chosen to be used as a PCM for this study due to its attractive techno-economic properties for use with solar thermal systems in domestic hot water applications; The effect of scale factor is not studied; The effect of the shape of the PCM container is not investigated in this study.

102p runthenight04 02-02-2023 19 2   Download

The nasal route for drug administration has the potential for local and systemic delivery of a wide variety of therapeutics. Nasal spray drug delivery has the potential to administer drugs to the bloodstream, avoiding the use of painful needles. While there is great potential, studies in the area are limited and somewhat conflicting. This study aimed to support the improvement of nasal drug delivery through experimental work on a model nasal cavity and through experimental characterisation of nasal spray behaviour. Four different brands of nasal spray were investigated.

91p runthenight04 02-02-2023 14 3   Download

The purpose of this research was to investigate the technological feasibility of biological filtration process for Mn control in Lorne WTP. This thesis consists of eight chapters. Project background and research objectives are described in Chapter 1. Chapter 2 presents an extensive literature review covering the nature of manganese, manganese analytical methods, manganese control methods, the nature of MOB and biological control of Mn in drinking water treatment. The materials and methods used throughout the experimental investigation for this study are described in Chapter 3.

119p runthenight04 02-02-2023 13 3   Download

The nasal route for drug administration has the potential for local and systemic delivery of a wide variety of therapeutics. Nasal spray drug delivery has the potential to administer drugs to the bloodstream, avoiding the use of painful needles. While there is great potential, studies in the area are limited and somewhat conflicting. The thesis "Experimental Studies in Aid of Improving Nasal Drug Delivery" aimed to support the improvement of nasal drug delivery through experimental work on a model nasal cavity and through experimental characterisation of nasal spray behaviour.

91p runordie3 06-07-2022 11 3   Download

To demonstrate the practicality of two proposed model, research works are focused on as follows: O-Marketplace Model, after analyzing the limitations of existing cloud service delivery methods, a multi-cloud service delivery method is proposed to overcome these limitations, and a promising multi-cloud marketplace model is built up; Composable Application Model, we first build up its concept and its description method, then the experimentation is conducted by transform into TOSCA specification to evaluate the feasibility of the proposed multi-cloud application model.

130p viabigailjohnson 10-06-2022 15 3   Download

The thesis is performed theoretically and experimentally. The theoretical studies on the dynamics of the single short pulse emission using transient cavity method and narrow linewidth and tunable wavelength generation using Littrow grating configuration were performed. On the other hand, the experimental investigations were carried out Experimental research was carried out based on the optimal results obtained by the theoretical studies.

27p beloveinhouse01 15-08-2021 36 4   Download

From the experimental studies on the indoor model, the analysis of the software model under the load of the column system combined with the high strength geogrid considering the ground pressure, the column deformation, and the mesh deformation, propose new calculation formulas, which are more suitable in GRPS design.

27p hobbsandshaw 09-06-2021 30 4   Download

The objectives of the thesis: Research, fabricate Er3+-doped silica glass microspheres with different sizes by arc discharge method; building an experimental system to investigate WGM mode laser emission spectrum in the optical communication wavelength region ~ 1550 nm of some fabricated microspheres.

28p extraenglish 24-05-2021 18 4   Download