Glass fiber

This paper presents the mechanical behavior of functionally-graded concrete (FGC) beam under flexural bending. The FGC beam was made of conventional concrete of strength class 30MPa with a thickness of 45mm and high performance glass fiber reinforced concrete (HPGFRC) of strength class 60MPa with thickness of 15mm.

7p vimitsuki 06-05-2025 3 1   Download

Manufacture composite based on epoxy reinforced by glass fiber with organ – modified nanosilica using organotitanate curing agent that have good mechanical strength, thermal stability, flame restraint ability; improve the toughness of epoxy resin by incorporating reinforcing agent such as organ – modified nanosilica and glass fiber with appropriate manufacturing condition and ratio.

28p capheviahe26 25-01-2021 35 3   Download

In this paper, the thermal properties of GFRP, CFRP, and Carbon and Glass fibers reinforced epoxy hybrid composite will be studied. The composites using are all unidirectional.

12p lucastanguyen 01-06-2020 21 5   Download

The present work deals with a simple approach which predicts the optimum setting of process parameters of drilling operation on Polymer Based Glass Fiber (PBGF) composite.

9p lucastanguyen 01-06-2020 24 3   Download

The set of intracavity field equations describing the evolution of intra-cavity pumping, Stokes and anti-Stokes powers of Raman laser is presented. Most attention is given to intra-cavity competition of two Raman waves, which depends on cavity properties, frequency shift and phase mismatch. The calculated results are based on Ge-doped and D2-gas-in glass fiber lasers at CW-regime and pulse-pumped regime.

8p 12120609 01-06-2020 14 2   Download

In the present study, the flexural behavior of concrete beams reinforced with longitudinal rebars made of glass fiber reinforced polymer composites (GFRP), is studied using finite element method.

8p tohitohi 19-05-2020 22 1   Download

In this study, the impact response of glass/epoxy laminates interleaved by Polycaprolactone (PCL) nanofibers is considered. PCL is a thermoplastic polymer, which is a good choice for toughening epoxy-based composite. The impact tests were conducted on curved laminates and under 24 and 36J.

6p tohitohi 19-05-2020 26 1   Download