
Hydrothermal method
-
In this study, a composite material between MnFe2O4 and activated carbon from coffee husks (MFO/AC) was synthesized using co-precipitate and hydrothermal methods to remove ammonium from aqueous solutions. The characteristics of MFO/AC were characterized and evaluated by scanning electron microscopy (SEM) and Fourier transform infrared spectra (FTIR).
9p
vijiraiya
19-05-2025
2
1
Download
-
In this study, we report on the hydrothermal synthesis of ZnO nanorods and the change in photocatalytic properties with different hydrothermal temperatures in the decomposition of Methylene blue (MB) and Rhodamine B (RhB) under visible light.
11p
viengfa
28-10-2024
2
1
Download
-
In this paper, ZnO/CuO/Ag ternary composites were successfully synthesized by hydrothermal method using Zn(NO3)2.6H2O, Cu(NO3)2.3H2O and AgNO3. The composite samples were characterized using X-Ray diffraction (XRD), Scanning Electron Microscopy (SEM) and Raman spectroscopy.
8p
viengfa
28-10-2024
3
1
Download
-
In the present work, CeO2 with different loading was embedded on reduced graphene oxide (rGO) by a simple one-pot hydrothermal method. The synthesized samples were characterized using XRD, EDX mapping, FESEM, and UV-Vis DRS techniques.
11p
vifilm
11-10-2024
4
1
Download
-
In this work, ZnFe2O4 nanoparticles were synthesized by hydrothermal method while the hummer method was used to synthesize GO nanosheet. GO/ZnFe2O4 nanocomposites (GO/ZFO) were prepared by mixing GO with ZnFe2O4 in mass ratio of 1:99, respectively.
8p
viengfa
28-10-2024
9
2
Download
-
In this study, heterogeneous catalysts were synthesized by hydrothermal method to load nano goethite to biochar derived from soybean curd residue, which served as catalysts for the heterogeneous degradation of tetracycline hydrochloride (TCH) in an aqueous solution.
9p
viinuzuka
28-02-2025
4
1
Download
-
In this study, we have successfully synthesized ZnO nanoparticles (ZnO NPs) using co-precipitation and hydrothermal methods. ZnO NPs were fabricated by co-precipitation for spherical shape, while the hydrothermal method was for rod-shaped morphology.
6p
viinuzuka
28-02-2025
2
1
Download
-
The project's main objectives were to analyse the data obtained during geological exploration and use it to model and predict biological patterns in order to answer the main research questions: 1) Is there a statistical relationship between the environmental parameters and the benthic community composition and morphospecies observed? 2) Can predictive models be developed from this relationship? In achieving these main objectives, the project also developed recommendations for methods that could be applied during geological exploration voyages to maximise the potential use of data collected.
206p
runthenight04
02-02-2023
7
2
Download
-
The purpose of this thesis is to study and synthesize BiMO materials (M = V,Ti,Sn) by microwaveassisted chemical method, hydrothermal method, sol-gel method and evaluate their physical properties. The synthesized materials (Bi2Sn2O7 and Bi2Ti2O7) were investigated the photocatalytic activity in the decomposition of RhotaminB (RhB) under visible light.
28p
thebadguys
08-06-2021
28
3
Download
-
In this paper, modified hydrothermal method for Ti-MWW catalyst preparation has been shown. Instrumental analysis of the zeolite material Ti-MWW has been performed by means of UV-vis spectrometry, infrared spectrometry (IR), scanning electron microscope (SEM), X-ray diffraction (XRD), and X-ray microanalysis.
8p
tocectocec
25-05-2020
8
3
Download
-
The main contents of the thesis: Synthesis and characterization of Fe3O4 nanoparticles, -Fe2O3 nanoparticles and γ-Fe2O3 nanoparticles by hydrothermal method. Compare the corrosion protection ability of epoxy film containing synthetic iron oxide particles. Fabrication and evaluation of steel corrosion protection effect of epoxy membrane containing magnetic iron oxide nanoparticles and nano iron oxide from organic denaturation with some silane compounds and with corrosion inhibiting compound.
26p
xacxuoc4321
08-07-2019
37
6
Download