Strength and elongation

The research mainly focused on optimizing the multi responses i.e. tensile strength, impact Strength and elongation while conducting the experiments on Friction Stir Welding process.

12p lucastanguyen 01-06-2020 8 1   Download

Polypropylene/ maleic anhydride /organic montmorillonite nanocomposites (PP/ MA/ Org-MMT) have been prepared via direct melt intercalation in an internal mixer. Maleic anhydride (MA) was used as a compatibilizer to improve the dispersability of the clay. The structures of nanocomposites have been characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Mechanical properties and thermal stability were determined by tensile analysis and thermogravimetric analysis (TGA), respectively.

8p 12120609 01-06-2020 18 2   Download

In this article, we investigated effect of carrier resin ratio and anti-oxidation additives content on properties of anti-oxidant additives Masterbatchs (MBs). The characteristics were measured by: melt flow index (MFI), morphology (SEM), tensile strength and elongation at break. The results indicated that: increasing LLDPE content in carrier resin led to decreasing mechanical properties, MFI weren’t uniform in MBs. With 80/20 of LDPE/LLDPE ratio, the tensile strength and elongation at break values were highest (21.0 MPa, 680.5 %).

7p abcxyz123_02 03-03-2020 28 2   Download

The study on the relationship between compositions and mechanical properties of the blends based on poly(vinyl chloride) (PVC), butadiene-acrylonitrile rubber (NBR) and natural rubber (NR) has been carried out. The result shows that in the presence of NBR, which plays role of transition phase between the two incompatible polymers PVC and NR, the tertiary phase polymer blends having high tensile strength and elongation at break were obtained.

4p uocvong04 24-09-2015 73 7   Download

In this study, the air-plasma generated by radio-frequency was used to treat bamboo fiber. The treatment parameters were studied to find the suitable condition. The testing on tensile strength, tensile modulus, module Weibull and elongation to break of the fiber, the measurement of contact angles and the SEM analysis showed that at the high frequency of 12 kHz, power 50 W and treatment time of 5 minutes, after air-plasma treatment the tensile strength and tensile modulus of bamboo fiber increased more than double (101.1% and 101.

5p uocvong01 24-09-2015 26 6   Download