Systems development

Mesoporous silica nanoparticles (MSNs) have been used as an anticancer drug delivery system with high safety and entrapment capacity thanks to their large internal space for drug accommodation, durable structure, and good biocompatibility. However, the treatment efficiency of the bare MSNs is limited due to its drug leakage and burst release. In this study, a phospholipid bilayer was covered on the MSNs surface (MSN@Lip) as a liposomal cap that not only reduced drug leakage but also improved the stability of the colloidal system.

8p dianmotminh02 03-05-2024 3 1   Download

Institutions are accelerating to achieve a sustainable competitive advantage in supply chain, its range is expanding to find the tools to help them achieve this purpose, and the growing need for these organizations to understand their current status as well as their potential. Therefore, organizations always depend on information systems to process transactions, develop products, access a large proportion of their budgets to support their operational and commercial activities, and how to acquire knowledge for business owners to access these investments.

16p longtimenosee10 26-04-2024 2 1   Download

This research aims to identify the rules of lean system application in the service industry. It also seeks to highlight the requirements of applying the lean production system on Al-Ahliyya Amman University to reduce costs. The research was conducted in the form of a case-study in Al-Ahliyya Amman University. Data was collected through discussions with some the officials in the university. Including the HR manager, the financial manager, the student affairs manager, and the student registration manager.

5p longtimenosee10 26-04-2024 2 1   Download

This thesis develops a flexible customer behavior analysis system, including essential head pose estimation or F-formation modules. This system will be evaluated in an actual retail store. Further, after studying the system, realizing the mentioned problems of the head pose problem, we also propose a process to collect the head pose dataset and multi-task deep neural network model, fusing face detection and head pose estimation to yield face position and head pose at the same time.

72p khanhchi0912 12-04-2024 2 2   Download

The purpose of the article is to consider supply chain strategy for the scientific and technological development of Russian regions. The examples of Germany, Great Britain, the USA, and China are analyzed to summarize the advanced foreign experience and identify the features of the state management of scientific and technological development. Proposals for the formation of a strategic planning system for the scientific and technological development of Russian regions are formulated.

10p longtimenosee09 08-04-2024 3 0   Download

The system of relations between the consumer and the seller has many factors that shape the dynamics of the market of goods and services based on the supply chain strategy. Supply chains satisfy customers by striving for delivering the right products to the right place at the right time, at the right quality and at the right quantity within an increasingly faster pace and lower cost. Theories of social entropy consider the system of social relations from the standpoint of the equilibrium of systems and their disproportion.

6p longtimenosee09 08-04-2024 7 0   Download

There is increasing evidence that the intestinal microbiota plays a crucial role in the maturation of the immune system and the prevention of diseases during childhood. Early-life short-course antibiotic use may affect the progression of subsequent disease conditions by changing both host microbiota and immunologic development.

16p vibransone 28-03-2024 4 2   Download

This research focuses on two key research questions: how to measure spatial accessibility to green space in urban areas at fine resolution; and what is the status of spatial inequity in accessibility to green space in the MMA. Guided by the two research questions and based on a systematic review of literature on accessibility in general accessibility to green space in particular, a methodology has been developed for producing results needed to answer the research questions.

246p runthenight05 01-03-2023 7 3   Download

This research presents a method for the identification of hazardous situations on the freeways as well as the hazard mitigation system based on the identification. The hazard identification is done using a crash risk probability model and based on the identification, mitigation strategy is employed to reduce the effect of the hazard. For this study, about 18 km long section of Eastern Freeway in Melbourne, Australia is selected as a test bed.

125p runthenight05 01-03-2023 5 3   Download

This research investigates other built-in sensors and develops methods for improving the accuracy of indoor positioning. Combination with the wireless network, it can be a viable alternative solution for the indoor positioning purposes of the smartphone users. The main advantage of this solution is that it can be deployed with a minimal cost, as no specialized hardware is necessary for setting up the system.

91p runthenight05 01-03-2023 6 3   Download

Magnetic bearing systems have received much attention in the research community for the past decades. Its inherent nonlinearity and open-loop instability present challenges for controller design. This thesis investigates and designs model predictive control (MPC) systems for an experimental Active Magnetic Bearing (AMB) laboratory system. A host-target development environment of real-time control system with hardware in the loop (HIL) is used for implementation of the predictive control systems. In this thesis, both continuous and discrete time model predictive controllers are studied.

172p runthenight05 01-03-2023 6 3   Download

In this thesis, the rolling contact wear of 52100 bearing steel and Over-aged Magnesia-Partially-Stabilised Zirconia (OA-Mg-PSZ) ceramic are examined using a newly developed rolling contact wear test rig. The new wear test rig simulates the system geometry of an un-lubricated hybrid (ceramic and steel) ball bearing. The new wear test rig is versatile in that it allows low cost samples to be utilised resulting in a larger number of samples that can be tested.

165p runthenight05 01-03-2023 6 3   Download

The problem investigated is the potential gap between the rhetoric of the 'promise of e-business' versus the dynamics of enactment and impacts of ICT in practice in the social enterprise sector. The main contribution of the research is to identify the real development impact of lCT use by social enterprises by assessing the role of ICTs in achieving their goals. Its major finding is that SEs' social and business missions are inextricably linked .and their use of ICTs and benefits from it can be used as a proxy to assess ICTD. Thus SEs provide a new paradigm in the study of ICTD.

228p runthenight05 01-03-2023 6 2   Download

The broad objective of research reported here was to develop a multi-publishing workflow for student atlases.

162p runthenight05 01-03-2023 4 3   Download

This research thesis seeks to understand how governments, the legal system and the people responsible for construction can be encouraged to incorporate sustainable design in all building developments. Most important within this research is to question the lack of checks of ESD conducted from the planning permit through to the construction phase or on completion of a building.

160p runthenight07 01-03-2023 7 2   Download

In the course of current research the procedure of obtaining of the piecewise linear vibration systems time and frequency responses have been developed. The method is partly analytical and partly numerical and is based on combining of linear solutions of different sections in a cycle of motion. In a row with the method of obtaining of the exact steady state time and frequency response, also it is provided sensitivity analysis of the vibration isolator.

86p runthenight07 01-03-2023 7 3   Download

The increasing use of Intelligent Transport System (ITS) can enable very close vehicle spacings which generally results in a net drag reduction for the resulting convoys. The majority of vehicle development has, to date, been for vehicles in isolation, thus the study of interaction effects is becoming increasingly important. The main objective of this research is to investigate the use of Computational Fluid Dynamics (CFD) for understanding convoy aerodynamics and to further the understanding of airflow interaction between vehicles via CFD.

154p runthenight07 01-03-2023 6 3   Download

The objective of this thesis was to investigate the development of a micro-electromechanical system (MEMS) which can be implanted in the eye to provide continuous monitoring of glaucoma conditions. Current glaucoma monitoring involves taking laboratory based intra ocular pressure (IOP) measurements. The measurement of intraocular fluid flow and IOP parameters related to blockage formation in the eye require to be continuously monitored in Glaucoma.

153p runthenight07 01-03-2023 3 3   Download

The Australian music industry is growing and developing yet specific information about the ways in which distribution systems develop is limited. In this study I examined the growth and change of the Australian music value chain. This includes the development of digital distribution systems and the effect that peer‐to‐peer technology has on system development, specifically the disintermediation between consumers and artists to the detriment of the multinational value chains.

107p runthenight07 01-03-2023 7 4   Download

This thesis intends to develop application-level access control models to address several major security issues in enterprise environments. The first goal is to provide simple and efficient authorization specifications to reduce the complexity of security management. The second goal is to provide dynamic access control for Web service applications. The third goal is to provide an access control framework for Semantic Web services. In this thesis, an Authorization-Function-Based Role-based Access Control (FB-RBAC) model is proposed for controlling enterprise systems at the application level.

182p runthenight07 01-03-2023 11 3   Download