Vibration analysis

The objective of this article is to investigate the free vibration analyses of the functionally graded magneto-electro-elastic (FG MEE) plates supported by an elastic foundation using the refined plate theory (RPT) with two variables.

12p viling 11-10-2024 2 1   Download

This study applies Wavelet analysis to develop a comprehensive method for detecting damage in spiral bevel gears within automotive drive systems. By utilising Wavelet analysis to examine the vibration signals of the gears, it is possible to identify spatial and temporal variations in the signals, thereby detecting signs of damage in the system.

12p vifilm 11-10-2024 5 1   Download

This paper applies the homotopy analysis method to study nonlinear free vibrations. The paper has used the homotopy analysis method to find analytical solutions of a nonlinear two-degree-of-freedom system. Analytical results have found the natural oscillation frequencies, the displacement formula of the system are approximately calculated at the 10th order.

9p viengfa 28-10-2024 2 0   Download

The primary objective of this work is to study the aerodynamic pressures on Mirror Surface at Various speeds to determine the effects of aerodynamics on to Mirror vibration. Additionally, the Mirror was modified by Shrouding around the external periphery to determine the possibility of minimisation of aerodynamic pressure fluctuations and thereby vibration. The Shrouding length used for the analysis was of 24mm, 34mm and 44mm length.

207p runthenight05 01-03-2023 13 3   Download

The aim of the research was the processing of the vibration signatures from healthy and damaged composite beams acquired with the help of a Scanning Laser Vibrometer (SLV) upon excitation and analysis of the mode shapes acquired for damage detection. The displacement mode shapes acquired were then converted into curvature mode shapes with the help of a Central Difference Approximation method (CDA).

146p runthenight07 01-03-2023 9 3   Download

In the course of current research the procedure of obtaining of the piecewise linear vibration systems time and frequency responses have been developed. The method is partly analytical and partly numerical and is based on combining of linear solutions of different sections in a cycle of motion. In a row with the method of obtaining of the exact steady state time and frequency response, also it is provided sensitivity analysis of the vibration isolator.

86p runthenight07 01-03-2023 15 3   Download

Objectives of the thesis: The literature review on the behaviours of composite beams shows that Ritz method is efficient to analyse the behaviours of composite beams with various boundary conditions, however, the number of researches used this method is still limited.

203p monsterhunterer 20-06-2021 12 3   Download

The objectives of the thesis: The thesis has developed a technique by combining the equivalent linearization method and the weighted averaging value to analyze the responses of some undamped free nonlinear vibrations.

31p extraenglish 24-05-2021 16 3   Download

The thesis has developeda technique by combining the equivalent linearization method and the weighted averagingvalueto analyze the responses of some undamped free nonlinear vibrations.

31p capheviahe29 17-03-2021 31 4   Download

The object of this thesis is to propose some beam models for static, buckling and vibration analysis of functionally graded isotropic and sandwich beams embedded in hygro-thermo-mechanical environments.

216p capheviahe28 01-03-2021 29 4   Download

This paper studies the effect of the change in air-fuel ratio on the engine and automobiles vibrations. Principle of vibration analysis is used to determine the system behavior. Air-fuel ratio is studied, as an input parameter, for stoichiometric, rich and lean fuels.

9p lucastanguyen 01-06-2020 32 3   Download

A molecular mechanism of the [3+2] cycloaddition has been explored using various DFT theoretical levels.

8p tocectocec 25-05-2020 8 2   Download

This paper is concerned with the vibration and stability analysis of thick rectangular plates resting on elastic foundation, which is distributed over the particular area of the plate. A two-parameter (Pasternak) model is considered to describe the elastic foundation.

18p tohitohi 19-05-2020 13 1   Download

The present problem deals with the thermo-elastic interaction of a gold nano-beam resonator induced by ramp-type heating under the two temperature theory of generalized thermoelasticity. The governing equations are constructed in the context of two-temperature three-phase-lag model (2T3P) and two-temperature Lord-Shulman (2TLS) model of generalized thermoelasticity.

16p tohitohi 19-05-2020 17 1   Download

An Eddy current damper uses magnets to suppress vibrations due to external excitations. These dampers also called electromagnetic dampers, have advantages of no mechanical contact, high reliability and stability, but require a relatively large volume and mass to attain a given amount of damping.

8p tohitohi 19-05-2020 34 3   Download

This paper presents a numerical analysis of free vibration of thin circular and annular plate using finite element method. The first five natural frequencies are presented for uniform annular plates of various inner-to-outer radius ratios, with nine possible combinations of free, clamped and simply supported boundary conditions at the inner and outer edges of plates.

8p tohitohi 19-05-2020 33 2   Download

In this paper free vibration analysis of eccentric and concentric stiffened isotropic plate with central stiffener and double stiffener has been studied and effect of various parameters such as boundary conditions, aspect ratio on non-dimensional frequency parameter of plate are investigated.

12p tohitohi 19-05-2020 24 2   Download

This paper presents two parameter foundation models for free vibration analysis of non-homogeneous orthotropic rectangular plate resting on elastic foundation whose concept is extensively used in engineering practice.

12p tohitohi 19-05-2020 16 2   Download

Cutouts are commonly used as access port for mechanical and electrical structures. Most of the tructures generally work under severe dynamic loading and different constrained conditions during their service life. This may lead to vibration of the structure.

8p tohitohi 19-05-2020 17 4   Download

This paper presents the free vibration analysis of stiffened isotropic plate by means of finite element method. Stiffeners are used in plates to increase the strength and stiffness. The effect of position of stiffeners on isotropic plate has been studied which involve the possible combination of clamped and free edge condition.

10p tohitohi 19-05-2020 13 1   Download