Composite Materials

In this study, a composite material between MnFe2O4 and activated carbon from coffee husks (MFO/AC) was synthesized using co-precipitate and hydrothermal methods to remove ammonium from aqueous solutions. The characteristics of MFO/AC were characterized and evaluated by scanning electron microscopy (SEM) and Fourier transform infrared spectra (FTIR).

9p vijiraiya 19-05-2025 2 1   Download

Composite materials are widely used in aesthetic dental restorations due to their advantages, including minimal invasive preparation, high mechanical strength, adhesive durability, biocompatibility, time and cost-effectiveness. This study investigates the effect of enamel-shade composite thickness on the final color values of restorations using a two-layer technique to replace enamel and dentine.

7p vijiraiya 19-05-2025 1 1   Download

In this work, a reduced order isogeometric model is proposed to analyze the dynamic behavior of carbon nanotube-reinforced composite plates. In which, the mechanical properties of the material are functionally graded through the plate thickness employing four distributions of carbon nanotubes.

14p visarada 28-04-2025 1 1   Download

This study addresses these issues by using recycled lightweight aggregates (RLWA) from waste polystyrene plastic as an alternative for coal bottom ash in the production of lightweight composites (LWC) incorporating ternary binder materials of cement, fly ash, and ground granulated blast-furnace slag.

15p visarada 28-04-2025 1 1   Download

The mechanical properties of compositionally graded nanocrystalline materials (CGNMs) are studied via molecular dynamics simulation. This article uses molecular dynamics (MD) simulations to investigate the tensile mechanical properties of CuNi CGNMs with varying grain sizes.

9p visarada 28-04-2025 3 1   Download

Vật liệu FGM (hay còn gọi là: vật liệu composite có cơ tính biến thiên, vật liệu cơ tính biến thiên, vật liệu FGM) có tên quốc tế: Functionally Graded Material (được viết tắt phổ biến là FGM), là một loại composite thế hệ mới được một nhóm các nhà khoa học ở viện Sendai của Nhật Bản nghiên cứu và phát triển lần đầu tiên vào năm 1984. Bài viết tập trung nghiên cứu về tính bền và ổn định của vật liệu FGM. Từ đó đưa ra nhận xét và xem xét đưa vật liệu mới vào lĩnh vực sản xuất chế tạo khung xe điện hiện nay.

3p vimaito 11-04-2025 1 1   Download

The present research develops soybean curd biochar loading goethite (SBCG) and soybean curd activated carbon loading goethite (SACG), a magnetic material made from soybean curd residue and Fe precursor (α-FeOOH), for advanced oxidation processes (AOPs) of TCH in aqueous solutions.

9p viling 11-10-2024 3 1   Download

Folding plates with wavy shapes made of composite materials have been widely applied, hence designing this type of structure is significant in practice. In this research work, the results of static calculation of the sinusoidal corrugated composite plates will be analyzed.

9p viengfa 28-10-2024 4 1   Download

In this study, an artificial neural networkbased Bayesian regularization (ANN) model is proposed to predict the compressive strength of concrete. The database in this study includes 208 experimental results synthesized from laboratory experiments with 9 input variables related to temperature change and design material composition.

12p viengfa 28-10-2024 2 2   Download

Photoluminescent composites consisting of a photoluminescent material dispersed in a suitable matrix have been applied in many applications, such as light-emitting diodes, solar concentrators, and anticounterfeiting inks. In this study, we have demonstrated a one-step method to prepare homogeneous composites by inducing the formation of in-situ photoluminescent centers in a stable matrix.

8p viaburame 14-03-2025 1 1   Download

The development of flexible electronic devices, particularly flexible and bendable energy storage devices, has catalyzed significant interest in the research of flexible composite materials. In this study, conductive paper membranes were synthesized by polymerizing polypyrrole (PPy) on the surface of cellulose fibers.

14p viaburame 14-03-2025 5 1   Download

Natural fiber-reinforced polymer-based composites are proposed as attractive candidates to replace or reduce the use of synthetic fibers because of their many advantages. Water hyacinth fiber (WHF) is a cellulosic material with high absorption and great potential for composite materials used.

10p viyamanaka 06-02-2025 3 2   Download

Recent research is focusing on the development of bio-packaging materials by mixing different polymers to enhance the bonding strength within the matrix and combining favorable properties of the constituent materials. This work developed a bio-packaging material by combining chitosan, gelatin, and glycerol.

10p viyamanaka 06-02-2025 4 2   Download

The main objective of this paper is to categorize the available literature (analytical/experimental). The discussion remains descriptive, and the reader is recommended to consult the cited references for specifics on parameters and mathematical models. Three phases were adopted to conduct this literature review: (a) conducting the review, (b) conducting the analysis, and (c) writing up the review.

12p tuetuebinhan000 23-01-2025 3 2   Download

The research focuses on the composition of a hard capsule formula containing the extracts of Houttuynia cordata, Morus alba, and Carica papaya as well as the development of testing standards for prepared hard capsules. Materials and methods: the ratio of adsorbents and fillers in the formula was investigated so that the granules had low moisture, a suitable flow rate, and the appropriate apparent density for packaging.

9p vinara 11-01-2025 1 1   Download

Is a branch of polymer science dealing with analysis and characterisation of polymers. üThe complication of macromolecular chains, the dispersion in molecular weight, tacticity, crystallinity, orientation, composition of polymers etc. and complex morphological systems ⇒ analysis of polymer ≠ the small organic materials ⇒ Focus on viscoelastic properties, dynamic mechanical testing.

114p buitiendung87 06-01-2011 347 154   Download

Tham khảo bài thuyết trình 'phân tích polyme (polymer analysis)', kỹ thuật - công nghệ, hoá học - dầu khí phục vụ nhu cầu học tập, nghiên cứu và làm việc hiệu quả

108p ktcn_1 17-07-2012 221 52   Download

The specific objectives of this study are: 1. To conduct a literature review on carbon-based hydrogen storage electrodes and direct proton absorbance in various forms of carbon; 2. To prepare and characterise activated carbon samples with proper porosity for the present application; 3. To manufacture and characterise a range of composite materials containing carbon material and a proton-conducting medium such as nafion in various levels of hydration 4. To fabricate a number of membrane-electrode-assembly (MEA) from the composite materials;…

264p runthenight05 01-03-2023 10 3   Download

The aim of this Master of Engineering (MEng) - Aerospace thesis is to study the structural response and failure of aerospace grade composites during exposure to fire. Key aspects of the research are to analyse the thermal and mechanical responses of laminates and sandwich composites in high temperature and fire environments, which result in softening and structural failure. The research is concentrated on carbon/epoxy laminates and sandwich composites, which are the most common composite materials used in aerospace structures.

209p runthenight05 01-03-2023 14 3   Download

The aim of the research was the processing of the vibration signatures from healthy and damaged composite beams acquired with the help of a Scanning Laser Vibrometer (SLV) upon excitation and analysis of the mode shapes acquired for damage detection. The displacement mode shapes acquired were then converted into curvature mode shapes with the help of a Central Difference Approximation method (CDA).

146p runthenight07 01-03-2023 9 3   Download