English materials engineering

The purpose of this study was to create an animal model of a mandibular alveolar bone defect without compromising the animal’s well-being. Materials and methods: A total of 24 New Zealand white rabbits underwent surgery to create mandibular alveolar bone defects.

10p viengfa 23-10-2024 4 1   Download

The materials with a spinel structure have gotten some attention for their resistance to oxidizing/reducing agents and their application in many fields such as pigments, refractory, electronic engineering, magnetism, and energy storage materials.

8p vifilm 11-10-2024 2 1   Download

The research is motivated by the growing interest in using natural products for biopolymer engineering, particularly in developing bioactive and biocompatible materials. Genipin, a natural blue colorant precursor, has garnered attention due to its unique chemical structure and crosslinking properties with natural polymers.

11p viinuzuka 28-02-2025 5 1   Download

The main objective of this paper is to categorize the available literature (analytical/experimental). The discussion remains descriptive, and the reader is recommended to consult the cited references for specifics on parameters and mathematical models. Three phases were adopted to conduct this literature review: (a) conducting the review, (b) conducting the analysis, and (c) writing up the review.

12p tuetuebinhan000 23-01-2025 3 2   Download

The purpose of this study was to create an animal model of a mandibular alveolar bone defect without compromising the animal’s well-being. Materials and methods: A total of 24 New Zealand white rabbits underwent surgery to create mandibular alveolar bone defects.

10p viharuno 03-01-2025 3 2   Download

In the context of the increasing global demand for sustainable energy development, the solution of using cementbased materials to develop batteries for energy storage has enormous potential, but this topic is still quite new to engineers and scientists in the construction industry. This study aims to systematically provide the basic principles as well as the current approaches and technical challengesin the development of batteries using cement-based materials.

8p vibenya 31-12-2024 7 2   Download

Normally, any ferromagnetic or ferrimagnetic material undergoes a transition to a paramagnetic state above its Curie temperature. Superparamagnetism is different from this standard transition since it occurs below the Curie temperature of the material. Superparamagnetism occurs in nanoparticles which are single domain. This is possible when their diameter is below 3–50 nm, depending on the materials.

33p thinh3m 28-03-2013 68 5   Download

Solubility parameters of carbon quantum dots (CQDs) are important physical properties to deploy CQDs in various applications such as organic light emitting diodes (OLEDs), light-converting materials in LEDs, and photoluminescent sensors for metal ion detection. Because of the low toxicity and tunable emission most CQDs have been designed to be water-soluble and biocompatible; oilsoluble CQDs that are essential for OLEDs are not yet explored.

8p viprimi 16-12-2024 5 1   Download

The prediction of the expected long-term performance of concrete exposed to sewage and similar materials can be difficult as it is affected by a large number of parameters. In addition, the deterioration process in concrete is generally slow. The focus of the study was to ascertain the life expectancy of concrete septic tanks located in rural Victoria. In developing the accelerated test method, ASTM C 192, ASTM C 452, ASTM C 1293 and ASTM C 109 standard procedures were adopted wherever possible.

172p runthenight05 01-03-2023 12 3   Download

The specific objectives of this study are: 1. To conduct a literature review on carbon-based hydrogen storage electrodes and direct proton absorbance in various forms of carbon; 2. To prepare and characterise activated carbon samples with proper porosity for the present application; 3. To manufacture and characterise a range of composite materials containing carbon material and a proton-conducting medium such as nafion in various levels of hydration 4. To fabricate a number of membrane-electrode-assembly (MEA) from the composite materials;…

264p runthenight05 01-03-2023 10 3   Download

The aim of this Master of Engineering (MEng) - Aerospace thesis is to study the structural response and failure of aerospace grade composites during exposure to fire. Key aspects of the research are to analyse the thermal and mechanical responses of laminates and sandwich composites in high temperature and fire environments, which result in softening and structural failure. The research is concentrated on carbon/epoxy laminates and sandwich composites, which are the most common composite materials used in aerospace structures.

209p runthenight05 01-03-2023 14 3   Download

The aim of the research was the processing of the vibration signatures from healthy and damaged composite beams acquired with the help of a Scanning Laser Vibrometer (SLV) upon excitation and analysis of the mode shapes acquired for damage detection. The displacement mode shapes acquired were then converted into curvature mode shapes with the help of a Central Difference Approximation method (CDA).

146p runthenight07 01-03-2023 9 3   Download

This project investigates the use of free radical initiators in the recycling of post consumer recycled high density polyethylene using reactive extrusion. Both molecular and rheological characterisation of recycled and reprocessed materials was carried out and this was followed by tensile testing of the modified materials to satisfy end use applications such as packaging and drainage piping.

154p runthenight07 01-03-2023 14 3   Download

This research project investigates the influence of decoration and decorating on a fashion design practice, exploring the transformative effects of both in relation to surface and structure. Decoration is considered an after-effect, an element that can be differentiated from the object it adheres to, sometimes making it superfluous to the object’s function. In this project I consider decoration as having its own function – the ability, through its link to the ‘exterior’ world, to transform the shape, appearance and materials of forms by modifying their facade.

100p runthenight07 01-03-2023 14 4   Download

The focus of this study is to investigate its optical and conductive properties under different conditions of doping environments, temperature and polymerization conditions. Optical characterization technique such as UV-Visible spectroscopy is developed to carry out the investigation. The developed nanofibers have been demonstrated to possess optical and conductive properties to be dependent on doping variables. Study of these optical properties could prove very useful in the development of electrochromic devices and gas sensors.

103p runthenight07 01-03-2023 13 3   Download

The purpose of this project is to enable the prediction of flow behaviour of concentrated slurries in the pipe loop under various laminar flow conditions using the fluid analogue to slurry and to find the suitable rheological model from the literature for the fluid analogue and tailings from the Sunrise dam. The major objective of the project is to develop a fluid analogue which will have similar rheological behaviour to that of the tailings from Sunrise dam so that it can be used as a test material to predict the flow behaviour of tailings in a pipe.

114p runthenight07 01-03-2023 12 3   Download

The objectives of the present study are: Justifying the possibility of using laser cladding technology as a repair method for refurbishment of worn railway axles without jeopardizing their fatigue properties; Analysis of crack initiation and propagation in laser clad samples.

130p runthenight07 01-03-2023 12 3   Download

A retaining wall constructed on expansive soil can be subjected to lateral swelling pressures due to soil swelling, which may cause a significant horizontal deformation and bending of the retaining wall. In Australia, it is generally assumed that the backfill behind a retaining wall is non-expansive material. Therefore lateral swelling pressures induced by expansive soils are ignored in routine design.

115p runthenight07 01-03-2023 21 3   Download

The goal of this thesis is to evaluate and compare the environmental impacts of alternative thermal treatments processing MRF residual waste in Victoria.

213p runthenight04 02-02-2023 12 2   Download

The specific research objectives of this study are: 1. The development of a high throughput method for evaluation of alloys (5xxx Al as model materials in this work) subject to pitting; 2. Understanding the roles of variation in functional groups' in determining the inhibition efficiency; 3. Elucidating the inhibition mechanisms; and 4. Unveiling the role of intermetallic present in Al matrix and their contribution to the inhibition mechanism, particularly the long-term durability of the inhibitor systems.

104p runthenight04 02-02-2023 16 2   Download