Make a lan connection

Learning objectives of this chapter include: Identify the basic network media required to make a LAN connection; identify the types of connections for intermediate and end device connections in a LAN; design an addressing scheme for an inter-network and assign ranges for hosts, network devices and the router interface; compare and contrast the importance of network designs.

64p youcanletgo_01 04-01-2016 61 5   Download

Used to connect two private networks together via the Internet Used to connect remote users to a private network via the Internet This could be done by opening your firewall to the LAN networking protocols (NETBIOS, NFS NetWare, AppleTalk)) But… it would also make those protocols available to any one on the Internet and they could come into your LAN at will Effectively make the whole Internet your LAN Exposes all of your data Anyone can easily take advantage of vulnerabilities in your internal hosts No privacy Better solution is to use a VPN in conjunction with your firewall ...

18p muathu_102 28-01-2013 82 3   Download

In random access or contention methods, no station is superior to another station and none is assigned the control over another. No station permits, or does not permit, another station to send. At each instance, a station that has data to send uses a procedure defined by the protocol to make a decision on whether or not to send.

54p trada85 22-01-2013 61 4   Download

Planning and Cabling Networks. Upon completion of this chapter, you will be able to: Identify the basic network media required to make a LAN connection. Identify the types of connections for intermediate and end device connections in a LAN. Identify the pinoutconfigurations for straight-through and crossover cables. Identify the different cabling types, standards, and ports used for WAN connections. Define the role of device management connections when using Cisco equipment.

38p thanhtung_hk 03-11-2010 119 22   Download

Identify the basic network media required to make a LAN connection. Identify the types of connections for intermediate and end device connections in a LAN. – Identify the pin out configurations for straight-through and crossover cables. Identify the different cabling types, standards and ports used for WAN connections. Define the role of device management connections when using Cisco equipment. Design an addressing scheme for an inter-network and assign ranges for hosts, network devices and the router interface. ...

45p thangvu89 15-04-2010 151 32   Download

The requirements for a network administrator have always been diverse. Get the users connected, make sure there’s enough bandwidth to run applications, keep the network secure, and so on. When problems come up on a traditional network, the solutions have often been fairly straightforward. If users aren’t connected, you connect them. If there’s not enough bandwidth, you buy new equipment. If network resources are vulnerable, you introduce appliances and applications that provide enhanced security. It’s a pretty tight loop of problems and solutions....

11p huyhoang 06-08-2009 1455 16   Download