Modeling

PHP là ngôn ngữ kịch bản phổ biến nhất thế giới vì tính linh hoạt và dễ sử dụng của nó so với các ngôn ngữ khác. Bài viết Sử dụng ngôn ngữ PHP để phát triển Website trình bày các nội dung: Model, Controller, Laravel, Bộ mã hóa, Symfony, Dự án Laminas, CakePHP.

3p vijaychest 16-05-2024 7 1   Download

Lecture "Administration and visualization: Chapter 3.1 - Data modelling and databases" provides students with content about: Data model; Data modeling; Ralational data model; Data modeling process;... Please refer to the detailed content of the lecture!

56p gaupanda031 20-05-2024 7 3   Download

Lecture "Administration and visualization: Chapter 3.2 - Data modelling and databases OLTP & OLAP" provides students with content about: Overview; OLTP vs OLAP; Data warehouse modeling; Data warehouse design; Data warehouse Implementation;... Please refer to the detailed content of the lecture!

71p gaupanda031 20-05-2024 5 3   Download

In this paper, a new design of cylindrical panels is proposed with two functionally graded carbon nanotube-reinforced composite (FG-CNTRC) face sheets and a corrugated core. The corrugated core layer is modelled by applying the homogeneous technique according to the firstorder shear deformation theory (FSDT). The nonlinear vibration behaviour of first-order shear deformable cylindrical panels with geometric nonlinearities is analysed in the present paper.

10p dathienlang1012 03-05-2024 2 0   Download

In this study, we propose to build an equivalent 2D model to replace the 3D model of corrugated composite sheets, by the method of homogenization, to study the nonlinear mechanical behavior of corrugated core composite sheets. This model helps to significantly reduce the calculation time as well as the model building time. The model homogeneity is confirmed by comparing the numerical simulation results of the 2D model and the 3D model.

8p dathienlang1012 03-05-2024 2 0   Download

This paper describes an investigation of fluid flow through two tandem circular cylinders using Lattice-Boltzmann Method in direct numerical simulation. The diameter ratio of two circular cylinders, D1/D2 varies from 0.5 to 1.5, and spacing ratio (L/D2) varies from 1.5 to 10, whereas the Reynolds number of 100 is considered. The numerical model is well validated by comparing the results with those obtained in the literature.

8p dathienlang1012 03-05-2024 6 1   Download

Bài giảng CAD/CAM/CNC - Bài 4.1: Mô hình hóa hình học cung cấp cho sinh viên những nội dung gồm: đặt vấn đề; mô hình 2D; mô hình khung dây 3D; mô hình mặt 3D; mô hình khối 3D;... Mời các bạn cùng tham khảo chi tiết nội dung bài giảng!

18p mothuahoa 04-05-2024 3 1   Download

Bài giảng CAD/CAM/CNC - Bài 4.2: Mô hình hóa hình học cung cấp cho sinh viên những nội dung gồm: khái quát; phương pháp kết cấu; phương pháp biên; các phương pháp khác;... Mời các bạn cùng tham khảo chi tiết nội dung bài giảng!

16p mothuahoa 04-05-2024 3 0   Download

Bài giảng Xúc tác - Chương 4: Động học phản ứng xúc tác (Kinetics of catalytic reactions). Chương này cung cấp cho học viên những nội dung gồm: giới thiệu; nồng độ trên bề mặt của chất bị hấp phụ; các mô hình (model) phản ứng trên xúc tác rắn; cách xây dựng phương trình tốc độ;... Mời các bạn cùng tham khảo!

11p mothuahoa 04-05-2024 2 2   Download

Lecture Network programing: JAVA socket programming. This lesson provides students with content about: what is a socket; client-server applications; sockets working model; socket programming with TCP; sockets for server and client; Unix/Linux socket functional calls; socket-programming using TCP; client/server socket interaction - TCP; socket programming with UDP;... Please refer to the detailed content of the lecture!

26p codabach1016 03-05-2024 8 1   Download

In recent years, the fourth industrial revolution has been progressing strongly, resulting in numerous accomplishments that have profound implications for various industries and sectors of the economy, including the banking sector. In the context of the digital transformation boom, traditional banking models have undergone modifications and advancements with the aim of boosting competitiveness and efficiency, leading to the emergence of the Open banking .

3p zizaybay1101 09-05-2024 8 3   Download

This study is to evaluate the precision of some new global Earth Gravitational Models in the East Vietnam Sea, selecting the best model. The method and the program for calculating Free air gravity anomaly from the global earth gravitational model have been researched and developed. Evaluation of the precision of the models is done by comparing the models with ship-derived gravity anomalies. Data with anomalous signs are detected and removed when the deviation exceeds three times the root mean square deviation.

13p dianmotminh02 03-05-2024 1 1   Download

This study is conducted based on the hypothesis of an accident from Fengcheng NPP with an incident level of 7, equivalent to the Fukushima accident. A modeling system has been established with different failure scenarios based on the Delft3D model. The research results will provide more insights into the extent and scope of the incident and the impact of meteorological conditions and dynamics on the propagation and distribution of radiation when an incident occurs.

17p dianmotminh02 03-05-2024 3 2   Download

This modeling is performed on an experimental data set of complexes, where the metal ions of these complexes include transition ion metals and lanthanide ion metals. We use these models to develop a series of new thiosemicarbazone and their complexes; simultaneously, the complexes are worked out the stability constants from the novel models.

9p dianmotminh02 03-05-2024 6 2   Download

This global minimum structure has the shape of a tetragonal bipyramid having two Sc atoms at two tops of pyramids binding with one edge of Ge-Ge. The ground electronic state of the global minimum isomer is the 2B2 state in the C2v symmetry. The most stable isomer of Sc2Ge6 − has been used to study the CO adsorption. The calculated results indicate that the Sc2Ge6 − cluster has a good interaction with the CO molecule. The adsorption positions are around the Sc atom with two stable models include adsorbing the C atom and adsorbing both the C and O atoms of the CO molecule.

7p dianmotminh02 03-05-2024 3 1   Download

This study has established and calibrated a three-dimensional system model with a combination of hydraulics-waves and suspended sediment transport with measured data in the study area. Based on the calculated scenarios for the flood and the dry seasons, the results show the occurrence of MTZs in the riparian zone of the Mekong river with typical suspended sediment concentrations (SSC) ranging from 0.04–1.0 kg/m3 dry season and 0.2–1.1 kg/m3 flood season.

18p dianmotminh02 03-05-2024 5 2   Download

In the present report, a novel concept of frequency response function (FRF) is introduced for piezoelectric beam. First, a model of Timoshenko beam bonded with a piezoelectric layer is established and used for deriving the conventional frequency response function acknowledged as mechanical frequency response function (MERF). Then, the output charge produced in the piezoelectric layer is calculated from the MFRF and therefore obtained frequency-dependent function is called electrical frequency response function (EFRF) for the integrated beam.

16p dianmotminh02 03-05-2024 3 1   Download

he study uses Best Track Data in the Western North Pacific region from 1961 to 2020. The wind speed fields of all TCs over the coastal zones are calculated using a semi-empirical model with a square grid of 0.05° resolution. The results show that the frequencies of TCs over the coastal zones decrease during El Niño years, whilethe TC intensities increase significantly compared to those in Neutral years. Meanwhile, TC intensities over all coastal zones during La Niña years, and some coastal zones during El Niño years, decrease significantly compared to those in Neutral years.

15p dianmotminh02 03-05-2024 1 1   Download

The 3D printing PMMA/ZrO2 filaments with a diameter of 1.75±0.05 mm were fabricated by using a single-screw extruder at temperatures of four heating zones of 190, 200, 210, and 210°C. Testing samples were prepared from the extruded filaments by using a fusion deposition modeling 3D printer and a Haake MiniJet piston injection molding machine. Fourier transform infrared spectroscopy, mechanical properties, field emission scanning electron microscopy (FESEM), differential scanning calorimetry, and thermogravimetric analysis of the filaments were investigated.

9p dianmotminh02 03-05-2024 1 1   Download

This article, we present a thorough and straightforward hydrothermal method towards the production of reduced graphene oxide templated MIL-53(Fe) hybrids RGO@MIL-53(Fe). The structural characteristics of created hybrids were identified by using BET, FESEM, powder X-ray diffraction, and FTIR techniques. Methylene blue (MB) dye (a model water pollutant) was used to evaluate H2O2-assisted photo-catalytic efficiency of RGO@MIL-53(Fe).

9p dianmotminh02 03-05-2024 2 1   Download